From: jay buss (ccie_sp@hotmail.com)
Date: Tue Dec 26 2006 - 08:14:27 ART
Hi Guys, client============================= interface FastEthernet0/0 no ip
address pppoe enable pppoe-client dial-pool-number 1 <<--- not
possible on subinterface, any idea? ! interface Dialer1 ip address 10.82.1.1
255.255.255.0 encapsulation ppp dialer pool 1 dialer-group 1 ppp
authentication chap callin ppp chap hostname client ppp chap password client!
dialer-list 1 protocol ip permit
PE-server=================================vpdn enable !vpdn-group PPPOE
accept-dialin protocol pppoe virtual-template 1! username client password 0
client! interface Ethernet0/0.82 no ip address pppoe enable ! interface
Virtual-Template1 ip address 10.82.1.2 255.255.255.0 ppp authentication chap
the above configuration works... But I want the client to be configured on
asub-interface and then I'm missing the " pppoe-client dial-pool-number 1"
command, so I can't get it to work, anybodyhave an idea? Thanks and happy
holidays!
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:39 ART