From: Tim (ccie2be@nyc.rr.com)
Date: Wed Dec 20 2006 - 13:25:29 ART
Just think of the vlan as an ethernet link where all hosts on the vlan share
the same ip subnet address.
So, let's say you have 2 routers connected to a switch and you're told to
configure the 2 routers to exchange routing info. That means that the L2
ports on the switch to which the routers are connected need to be assigned
to the same vlan.
HTH, Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Night War
Sent: Wednesday, December 20, 2006 8:38 AM
To: ccielab@groupstudy.com
Subject: Enabling Routing Protocols on a VLAN
Hello Group,
I don't have any experience working with both routers and layer-3 switches.
Could someone explain to me what do some workbooks mean when they say
1. Configure OSPF area 45 on VLAN 45
2. Configure RIP on VLAN 63
What does these question actuall mean?
Do I need to enable OSPF only on routers inside this VLAN45 or do I need to
enable OSPF on routers as well as the layer-3 switch having VLAN 45. I've
been reading Routing TCP/IP Volume 1 by Jeff Doyle. Most of the case studies
uses only routers.
Thanks
Fahad
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:38 ART