From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Dec 15 2006 - 17:15:18 ART
My reply was asking for anything else you've ever run across regarding
ARP and PPP. Not the DocCD command reference ;-)
Also you should try and figure out if PPP even supports ARP and if so
what would a PPP need ARP for.
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
koury@london.com
Sent: Friday, December 15, 2006 11:53 AM
To: ccielab@groupstudy.com
Subject: Re: RE: RE: Re: no ip gratuitous-arp
ip gratuitous-arps
To enable the transmission of Address Resolution Protocol (ARP) messages
when a device connects over a PPP connection even if the device has
obtained an address from a local pool, use the ip gratuitous-arps
command in global configuration mode. To disable the functionality, use
the no form of this command.
ip gratuitous-arps
no ip gratuitous-arps
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hi
ad_r/adr_i1h.htm#wp1188387
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:38 ART