From: Mohamed Saeed (mohamed_saeed2@rayacorp.com)
Date: Tue Dec 12 2006 - 17:53:11 ART
Hi All,
I have tried to get this task working but I could not. I understand the
solution and implemented it as exactly as the solution guide. I have
enabled EIGRP on BB3 for testing. EIGRP routes are leaking to BB3 and
they really should not.
Also, I have two concerns:
1. The solution applies an ACL to non-routed port on SW1. It seems
working but I remember that somewhere on the site I read that ACLs could
only applied on L3 interface.
2. After applying the access list, R1, R3 and R6 are not seeing BB3 as
an EIGRP neighbor anymore. However, BB3 could see R1, R3 and R6 as EIGRP
neighbors ! Wondering if this is normal behavior.
Appreciate if someone could help with this.
Kind Regards
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:37 ART