RE: anybody passed the CCIE r/s exam ?

From: Bob Sinclair (bsinclair@netmasterclass.net)
Date: Mon Dec 11 2006 - 16:30:54 ART


Darby,

Over this past month I have been working with well-prepared students here at
NMC to help them cope with 4-switch scenarios. From what I have seen,
students who are in the habit of creating good VLAN diagrams cope well.
Students who think they don't have time to diagram the VLANs do not.

The challenge is primarily one of organizing the information. Candidates
need to develop good diagramming skills in order to succeed. In addition,
the 4-switch scenario increases the early configuration burden - it is just
a lot more layer-2 work that needs to be done.

Just my 2 cents!

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Darby Weaver
Sent: Monday, December 11, 2006 8:52 AM
To: Kenza@kenza.nl; groupstudy@cconlinelabs.com; ccielab@groupstudy.com
Subject: Re: anybody passed the CCIE r/s exam ?

Is it really that much more difficult with an extra
switch or two?

Hmmm...

Well I guess if one introduces the criss-cross for
redundancy.

Maybe if one gets more explicit in terms of
spanning-tree.

Trunking should not pose that many more challenges.

QoS could get more interesting.

VTP - Could get more interesting - but it is
relatively simple as-is - so if you had two switches
or 50 it should not matter as much.

I would actually think that it would be more welcome
as more points would directed towards switching.

Exactly what are you worried about getting more
complex?

DTP?

--- "Kenza@kenza.nl" <sales@kenza.nl> wrote:

> yes i know, but it get complex when you have 3 or 4
> switches, more
> diffuclties then when you have just 2 switches.
>
>
> ----- Original Message -----
> From: "Tony Schaffran" <groupstudy@cconlinelabs.com>
> To: "'Kenza@kenza.nl'" <sales@kenza.nl>;
> <ccielab@groupstudy.com>
> Sent: Monday, December 11, 2006 1:35 PM
> Subject: RE: anybody passed the CCIE r/s exam ?
>
>
> > No need to get hung up on the actual number of
> switches.
> >
> > Spanning-tree is the same regardless if there are
> 2 switches or 20.
> >
> > Focus on the technology and you will pass.
> >
> > Tony Schaffran
> > Network Analyst
> > CCIE #11071
> > CCNP, CCNA, CCDA,
> > NNCDS, NNCSS, CNE, MCSE
> >
> > www.cconlinelabs.com
> > Your #1 choice for online Cisco rack rentals.
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> > Kenza@kenza.nl
> > Sent: Monday, December 11, 2006 3:08 AM
> > To: ccielab@groupstudy.com
> > Subject: anybody passed the CCIE r/s exam ?
> >
> >
> > Anybody got lab with only 3 switches to configure
> ? or is it the 4
> > switches
> > which have to be configured.
> >
> > im going to take the exam in januari.
> >
> > thx for your input
> >
> > rgds,
> >
> >
> >
> >
> > Disclaimer
> >
>
************************************************************************
> > Aan dit bericht kunnen geen rechten worden
> ontleend. Dit bericht is
> > uitsluitend bestemd voor de geadresseerde. Als u
> dit bericht per abuis
> > hebt ontvangen, wordt u verzocht het te
> vernietigen en de afzender te
> > informeren. Wij adviseren u om bij twijfel over de
> juistheid of de
> > volledigheid van de mail contact met afzender op
> te nemen.
> >
> > This message shall not constitute any rights or
> obligations.
> > This message is intended solely for the addressee.
> > If you have received this message in error, please
> delete it and
> > notify the sender immediately. When in doubt
> whether this message
> > is correct or complete, please contact the sender.
> >
>
************************************************************************
> >
> >
>



This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:37 ART