From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Mon Dec 11 2006 - 09:35:12 ART
No need to get hung up on the actual number of switches.
Spanning-tree is the same regardless if there are 2 switches or 20.
Focus on the technology and you will pass.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kenza@kenza.nl
Sent: Monday, December 11, 2006 3:08 AM
To: ccielab@groupstudy.com
Subject: anybody passed the CCIE r/s exam ?
Anybody got lab with only 3 switches to configure ? or is it the 4 switches
which have to be configured.
im going to take the exam in januari.
thx for your input
rgds,
Disclaimer
************************************************************************
Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is
uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis
hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te
informeren. Wij adviseren u om bij twijfel over de juistheid of de
volledigheid van de mail contact met afzender op te nemen.
This message shall not constitute any rights or obligations.
This message is intended solely for the addressee.
If you have received this message in error, please delete it and
notify the sender immediately. When in doubt whether this message
is correct or complete, please contact the sender.
************************************************************************
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:37 ART