From: Danny Cox (dandermanuk@gmail.com)
Date: Sun Dec 10 2006 - 21:25:05 ART
Ahh .. that's interesting.
I've found that sometimes when I've done some tcl work, route-map set
commands just echo what I've set to the screen instead of setting the
variable/tag/whatever. If I exit config mode, do a tclquit, and go
back again, it seems to resolve it. Anyone found this, or found
another way around it?
cheers
Danny
On 10/12/06, Nick Griffin <nick.jon.griffin@gmail.com> wrote:
> Any way to keep that stored in memory or the like, so when you do a tclquit,
> and later perfrom tcl tests again it is still available?
>
> R1(tcl)#proc ping_all {} {
> +>(tcl)#foreach address {
> +>(tcl)#192.168.72.2
> +>(tcl)#192.168.72.7
> +>(tcl)#192.168.46.6
> +>(tcl)#192.168.46.4
> +>(tcl)#} { ping $address} }
>
> R1(tcl)#ping_all
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.72.2, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 60/61/68 ms
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.72.7, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 56/59/60 ms
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.46.6, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 112/118/132 ms
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.46.4, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 116/116/120 ms
> R1(tcl)#tclquit
> R1#tclsh
> R1(tcl)#ping_all
> invalid command name "ping_all" ^
> % Invalid input detected at '^' marker.
>
> Thanks!
>
> On 12/9/06, Brian Dennis <bdennis@internetworkexpert.com> wrote:
> >
> > As far as reusing the script goes have you tried using a procedure?
> >
> > Rack1R4#tclsh
> > Rack1R4(tcl)#proc ping_all {} {
> > +>foreach address {
> > +>192.168.1.1
> > +>192.168.2.2
> > +>192.168.3.3
> > +>} { ping $address} }
> >
> > Rack1R4(tcl)#ping_all
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 120/120/120
> > ms
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 192.168.2.2, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 60/60/60 ms
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 192.168.3.3, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 60/60/60 ms
> > Rack1R4(tcl)#
> > Rack1R4(tcl)#ping_all
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 116/118/120
> > ms
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 192.168.2.2, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 56/59/60 ms
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 192.168.3.3, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 56/59/60 ms
> > Rack1R4(tcl)#
> >
> >
> >
> > Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> > bdennis@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987
> > Direct: 775-745-6404 (Outside the US and Canada)
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Radioactive Frog
> > Sent: Saturday, December 09, 2006 3:28 PM
> > To: Cisco certification
> > Subject: Automating TCL script in routers
> >
> > Hi Gang,
> >
> > Is it possible to automate a TCL script in Cisco Routers?
> > For example:
> >
> > If I saved in router and should run after every 10 minutes?
> >
> >
> >
> > Frog.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:37 ART