From: Hoang Anh Tuan (tuaninbox@yahoo.com)
Date: Sun Dec 10 2006 - 13:54:05 ART
Hi Aamir,
Can you make clear in which situation "ip dhcp-server" is used?
Thanks
Tuan
----- Original Message ----
From: Aamir Merchant
<aamir_8@hotmail.com>
To: Hoang Anh Tuan <tuaninbox@yahoo.com>;
ccielab@groupstudy.com
Sent: Sunday, December 10, 2006 8:55:07 PM
Subject: RE:
DHCP Relay using ip dhcp-server
Hi,
DHCP relay can configure by using IP
helper-address command only, ip dhcp-server 172.16.0.1 command is used for
local DHCP server configuration.
Regards
Aamir
> Date: Sat, 9 Dec 2006
21:47:52 -0800
> From: tuaninbox@yahoo.com
> Subject: DHCP Relay using ip
dhcp-server
> To: ccielab@groupstudy.com
>
> Hi Group,
>
> I'm configuring
DHCP Relay using command: (config)# ip dhcp-server
> <server addrress>. But
the client can't get IP address from DHCP server.
>
> My
> config is:
>
> ip
dhcp-server 172.16.0.1
>
> int g0/1
> ip address 172.16.0.2
> 255.255.255.0
>
no shut
> int g0/0
> ip address 10.0.0.1 255.255.255.0
> no shut
> Client can
get IP address if I use command: (config-if)# ip helper-address on
> int g0/0
>
> Do I need to add any other command?
>
> Thanks
>
> Tuan
>
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:37 ART