From: Brad Ellis (brad@ccbootcamp.com)
Date: Sat Dec 09 2006 - 15:01:32 ART
Alfred,
You should be able to do our ccbootcamp labs with that. However, i would
suggest purchasing a 2511 for reverse telnet, this will make your life much
easier. In addition, we are adding two more switches to our scenarios, so
that's another thing that you're missing.
hth
-brad
----- Original Message -----
From: "Alfred Alberto" <alfred.alberto@yahoo.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Friday, December 08, 2006 12:47 PM
Subject: R&S prep lab equipment and workbook..
Hello,
As part of my R&S lab preparation I have the below equipment list, but
I have some questions:
Will the below list be enough for the lab practice?
Do I still need anything else. i am not sure if what i got will be enough
(regarding the serial interfaces and the ethernet interfaces)!!
In regards to
the equipment I have; what is the most appropriate lab Workbook?
# For the
Frame-Relay Switch I have:
1 x 3825 Router (default HW configuration) + 1 x
NM-8A/S (for the Frame-Relay clouds) + 1 NM-16A (for the terminal server)
#
For the Core Routers I have:
6 x 2811 Routers (default HW configuration)
# For
the Backbone I have:
3 x 2801 Routers (default HW configuration)
# I also got
the following interfaces:
2 x WIC-2T
4 x WIC-1T
2 x NM-HDV2-2T1/E1
2 x
VWIC-1MFT-E1
# and finally I have:
2 x 3350 Switches
Regards,
Alfred, CISSP
MCSE, CCNA, CCNP, CQS FW, CQS VPN
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:37 ART