From: Scott Morris (swm@emanon.com)
Date: Thu Dec 07 2006 - 21:33:44 ART
The 12.2S train is what will run on 7200s. This won't run on 3640's. You
can run enterprise code and support MANY features of MPLS, just not all of
them.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
SAVJANI, HITESH, WWCS
Sent: Thursday, December 07, 2006 7:17 PM
To: Lab Rat #109385382; Brian Dennis; Khurram Hashmi (khashmi);
ccielab@groupstudy.com
Subject: RE: CCIE SP lab ATM Equipment
I have a question about 7200s. I do know that they are there on SP blue
print. Does anyone know if or not we can replace 7200s with 3640s? Can we
practice all the features on 3640s? Can I build a lab with 3640s instead?
Thanks is advance.
Hitesh Savjani
CCIE # 17151
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Lab
Rat #109385382
Sent: Thursday, December 07, 2006 6:49 PM
To: 'Brian Dennis'; Khurram Hashmi (khashmi); ccielab@groupstudy.com
Subject: RE: CCIE SP lab ATM Equipment
Can you use a Cat5500 chassis with the ATM switch module in it?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brian Dennis
Sent: Thursday, December 07, 2006 3:23 PM
To: Khurram Hashmi (khashmi); ccielab@groupstudy.com
Subject: RE: CCIE SP lab ATM Equipment
1 - LS1010 Chassis
1 - ATM Switch Processor
1 - Power Supply
1 - WATM-CAM-2P
1 - WAI-OC3-4MM
The 3640's are fine for ATM. If you already have 7200's the ATM PA's are
pretty cheap on eBay.
HTH,
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Khurram Hashmi (khashmi)
Sent: Thursday, December 07, 2006 1:29 PM
To: ccielab@groupstudy.com
Subject: CCIE SP lab ATM Equipment
Hello
I am in the process of building a lab and wanted to know what would be the
best /cheapest way to build the ATM section of the CCIE SP lab
Can someone please tell me what modules are needed for the LS1010 ?
Also in terms of routers , would Qty 2 x 3640 with the NM-1A-OC3MM module be
ok to connect to the LS1010 and to test MPLS cell mode
Many thanks
Khurram
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:37 ART