From: Lab Rat #109385382 (techlist01@gmail.com)
Date: Thu Dec 07 2006 - 20:49:21 ART
Can you use a Cat5500 chassis with the ATM switch module in it?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brian Dennis
Sent: Thursday, December 07, 2006 3:23 PM
To: Khurram Hashmi (khashmi); ccielab@groupstudy.com
Subject: RE: CCIE SP lab ATM Equipment
1 - LS1010 Chassis
1 - ATM Switch Processor
1 - Power Supply
1 - WATM-CAM-2P
1 - WAI-OC3-4MM
The 3640's are fine for ATM. If you already have 7200's the ATM PA's are
pretty cheap on eBay.
HTH,
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Khurram Hashmi (khashmi)
Sent: Thursday, December 07, 2006 1:29 PM
To: ccielab@groupstudy.com
Subject: CCIE SP lab ATM Equipment
Hello
I am in the process of building a lab and wanted to know what would be the
best /cheapest way to build the ATM section of the CCIE SP lab
Can someone please tell me what modules are needed for the LS1010 ?
Also in terms of routers , would Qty 2 x 3640 with the NM-1A-OC3MM module be
ok to connect to the LS1010 and to test MPLS cell mode
Many thanks
Khurram
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:37 ART