From: Topass Mustpass (ccie_certain@hotmail.com)
Date: Tue Dec 05 2006 - 02:55:18 ART
I have 1841 routers with 2 Serieal cards and 2 FE interface.If i can get
advancedIPservices IOS image for them.Please i want to know my limitation
for using them to set up my Labs.Exepecially for IE workbook.I had gotten
frame relay switch already.
Need your comments guys.
>From: "Michael Zuo" <mzuo@ixiacom.com>
>Reply-To: "Michael Zuo" <mzuo@ixiacom.com>
>To: <ccielab@groupstudy.com>
>Subject: need help with understanding VTP command output
>Date: Mon, 4 Dec 2006 21:40:17 -0800
>
>Hi Group,
>
>
>
>I enabled VTP pruning between SW1 and SW2 where SW2 is the server (see
>below). SW2 has ports in VLAN 2 and 3 and SW1 has ports in VLAN 2 and
>4. shouldn't the VTP pruning allow only VLAN 1 and 2 to go over the
>trunks since VLAN 2 is the only VLAN used by both switches? Why does my
>output shows that SW2 allows 1,2,4 and SW1 allows 1 and 3?
>
>
>
>Thanks in advance....
>
>
>
>
>
>
>
>SW2(config)#do sh vlan
>
>
>
>VLAN Name Status Ports
>
>---- -------------------------------- ---------
>-------------------------------
>
>1 default active Fa0/1, Fa0/4, Fa0/5,
>Fa0/6
>
> Fa0/7, Fa0/8, Fa0/9,
>Fa0/10
>
> Fa0/11, Fa0/12, Fa0/16,
>Fa0/17
>
> Fa0/18, Fa0/19, Fa0/20,
>Fa0/21
>
> Fa0/22, Fa0/23, Fa0/24,
>Gi0/1
>
> Gi0/2
>
>2 VLAN0002 active Fa0/2
>
>3 VLAN0003 active Fa0/3
>
>4 VLAN0004 active
>
>26 VLAN0026 active
>
>43 VLAN0043 active
>
>55 VLAN0055 active
>
>62 VLAN0062 active
>
>1002 fddi-default act/unsup
>
>1003 token-ring-default act/unsup
>
>1004 fddinet-default act/unsup
>
>1005 trnet-default act/unsup
>
>
>
>VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1
>Trans2
>
>---- ----- ---------- ----- ------ ------ -------- ---- -------- ------
>------
>
>
>
>SW2(config)#do sh int trun
>
>
>
>Port Mode Encapsulation Status Native vlan
>
>Fa0/13 on 802.1q trunking 1
>
>Fa0/14 on 802.1q trunking 1
>
>Fa0/15 desirable n-802.1q trunking 1
>
>
>
>Port Vlans allowed on trunk
>
>Fa0/13 1-4094
>
>Fa0/14 1-4094
>
>Fa0/15 1-4094
>
>
>
>Port Vlans allowed and active in management domain
>
>Fa0/13 1-4,26,43,55,62
>
>Fa0/14 1-4,26,43,55,62
>
>Fa0/15 1-4,26,43,55,62
>
>
>
>Port Vlans in spanning tree forwarding state and not pruned
>
>Fa0/13 1-2,4
>
>Fa0/14 none
>
>Fa0/15 none
>
>SW2(config)#do sh vtp st
>
>VTP Version : 2
>
>Configuration Revision : 3
>
>Maximum VLANs supported locally : 1005
>
>Number of existing VLANs : 12
>
>VTP Operating Mode : Server
>
>VTP Domain Name : CCIE
>
>VTP Pruning Mode : Enabled
>
>VTP V2 Mode : Disabled
>
>VTP Traps Generation : Disabled
>
>MD5 digest : 0xA2 0xCA 0x34 0x8F 0x26 0x52 0xD2
>0x1F
>
>Configuration last modified by 0.0.0.0 at 3-1-93 00:11:44
>
>Local updater ID is 0.0.0.0 (no valid interface found)
>
>SW2(config)#
>
>
>
>
>
>SW1(config)#do sh vlan
>
>
>
>VLAN Name Status Ports
>
>---- -------------------------------- ---------
>-------------------------------
>
>1 default active Fa0/1, Fa0/3, Fa0/5,
>Fa0/6
>
> Fa0/7, Fa0/8, Fa0/9,
>Fa0/10
>
> Fa0/11, Fa0/12, Fa0/16,
>Fa0/17
>
> Fa0/18, Fa0/19, Fa0/20,
>Fa0/21
>
> Fa0/22, Fa0/23, Fa0/24,
>Gi0/1
>
> Gi0/2
>
>2 VLAN0002 active Fa0/2
>
>3 VLAN0003 active
>
>4 VLAN0004 active Fa0/4
>
>26 VLAN0026 active
>
>43 VLAN0043 active
>
>55 VLAN0055 active
>
>62 VLAN0062 active
>
>1002 fddi-default act/unsup
>
>1003 token-ring-default act/unsup
>
>1004 fddinet-default act/unsup
>
>1005 trnet-default act/unsup
>
>
>
>VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1
>Trans2
>
>---- ----- ---------- ----- ------ ------ -------- ---- -------- ------
>------
>
>
>
>SW1(config)#do sh inter trun
>
>
>
>Port Mode Encapsulation Status Native vlan
>
>Fa0/13 on 802.1q trunking 1
>
>Fa0/14 on 802.1q trunking 1
>
>Fa0/15 on 802.1q trunking 1
>
>
>
>Port Vlans allowed on trunk
>
>Fa0/13 1-4094
>
>Fa0/14 1-4094
>
>Fa0/15 1-4094
>
>
>
>Port Vlans allowed and active in management domain
>
>Fa0/13 1-4,26,43,55,62
>
>Fa0/14 1-4,26,43,55,62
>
>Fa0/15 1-4,26,43,55,62
>
>
>
>Port Vlans in spanning tree forwarding state and not pruned
>
>Fa0/13 1,3
>
>Fa0/14 1
>
>Fa0/15 1
>
>SW1(config)#do sh vtp st
>
>VTP Version : 2
>
>Configuration Revision : 3
>
>Maximum VLANs supported locally : 1005
>
>Number of existing VLANs : 12
>
>VTP Operating Mode : Client
>
>VTP Domain Name : CCIE
>
>VTP Pruning Mode : Enabled
>
>VTP V2 Mode : Disabled
>
>VTP Traps Generation : Disabled
>
>MD5 digest : 0xA2 0xCA 0x34 0x8F 0x26 0x52 0xD2
>0x1F
>
>Configuration last modified by 0.0.0.0 at 3-1-93 00:11:44
>
>SW1(config)#
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:36 ART