From: VirtRack.com Mailing Lists (ciscolists@gmail.com)
Date: Sat Dec 02 2006 - 23:37:01 ART
Your other option at physical switchport level:
SW1(config-if)#srr-queue bandwidth limit ?
<10-90> enter bandwidth limit for interface as percentage
On 12/2/06, Scott Morris <swm@emanon.com> wrote:
>
> You have to think about it from the logic of the switch. Things are
> really
> inbound to a VLAN and then they're moved on a L2 basis deciding which
> port(s) to exit. So an output policy is not a real good logical
> application
> since (generically anyway) the switch won't have any concept of which port
> or ports it is trying to deal with.
>
> HTH,
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
> #153, CISSP, et al.
> CCSI/JNCI-M/JNCI-J
> IPExpert VP - Curriculum Development
> IPExpert Sr. Technical Instructor
> smorris@ipexpert.com
> http://www.ipexpert.com
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> VirtRack.com Mailing Lists
> Sent: Saturday, December 02, 2006 9:19 PM
> To: ccielab@groupstudy.com
> Subject: Re: Can the 3560 police traffic outbound?
>
> I'd have to agree, not supported outbound:
> (SVI)
> SW1(config-if)#service-policy output marking
> QoS: policymap is not supported on virtual interfaces
>
> ('switchport' physical interface)
> SW1(config-if)#service-policy output marking
> Warning: Assigning a policy map to the output side of an interface not
> supported
>
>
> On 12/2/06, Bob Sinclair <bob@bobsinclair.net> wrote:
> >
> > Victor,
> >
> > From everything I can see, the 3560 supports only the "service-policy
> > input"
> > command on a physical port or an SVI. The Doc CD is pretty clear about
> > it, and I get nothing but errors when I try a service-policy out on an
> SVI.
> >
> > HTH,
> >
> >
> > Bob Sinclair
> > CCIE 10427 CCSI 30427
> > www.netmasterclass.net
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of Victor Cappuccio
> > Sent: Saturday, December 02, 2006 7:42 PM
> > To: ccielab@groupstudy.com
> > Subject: Can the 3560 police traffic outbound?
> >
> > I mean many different SVIs routing to a Vlan 2 Internet Access, can I
> > do a service policy outbound to this SVI?
> >
> > Or this must be done inbound?
> >
> >
> >
> > Thanks for the clarification in advance
> >
> > Victor.-
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Online rack rental and CCIE Forums at http://www.virtrack.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
-- Online rack rental and CCIE Forums at http://www.virtrack.com
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:36 ART