From: Frank (ocsic@web.de)
Date: Thu Nov 30 2006 - 05:12:37 ART
Kulcsar Andras Benjamin schrieb:
Ok. Thanks!
> Hello,
>
> For rmon, you do not need to use "snmp-server enable traps".
> You can test this by debugging snmp traps.
>
> Regards,
> Andras
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Frank
> Sent: Thursday, November 30, 2006 7:44 AM
> To: Cisco certification
> Subject: snmp-server, rmon
>
> Hi,
>
> do you have to enable traps with for the snmp-server command, to be able to send traps from rmon?
> I'm asking, since rmon needs a valid snmp-server setup.
>
> Like:
>
> rmon event 10 trap COMMSTR description "Above Value" owner config
>
> snmp-server host 1.1.1.1 COMMSTR
> snmp-server enable traps
>
>
> Frank
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:49 ART