From: Udo (ccie_groupstudy@yahoo.de)
Date: Wed Nov 29 2006 - 14:06:25 ART
No..it seems not to be the problem..
here you can see the configs
R3
.....
interface Serial0/0
ip address 167.1.135.3 255.255.255.0
encapsulation frame-relay
frame-relay map ip 167.1.135.1 301 broadcast
frame-relay map ip 167.1.135.5 305 broadcast
no frame-relay inverse-arp
!
interface Serial0/1
no ip address
encapsulation frame-relay
no frame-relay inverse-arp
!
interface Serial0/1.34 point-to-point
ip address 167.1.34.3 255.255.255.0
frame-relay interface-dlci 314
des FR to Router 4
!
interface Serial0/2
ip address 167.1.13.3 255.255.255.0
desc Serial To Router3
!
interface Serial0/3
no ip address
shutdown
!
router eigrp 10
network 150.1.3.3 0.0.0.0
network 167.1.13.3 0.0.0.0
network 167.1.34.3 0.0.0.0
network 167.1.135.3 0.0.0.0
network 204.12.1.3 0.0.0.0
no auto-summary
eigrp router-id 150.1.3.3
Router 4:
interface Serial0/0
ip address 167.1.34.4 255.255.255.0
encapsulation frame-relay
frame-relay map ip 167.1.34.3 413 broadcast
no frame-relay inverse-arp
!
!
interface Serial0/1
ip address 167.1.45.4 255.255.255.0
ip bandwidth-percent eigrp 10 25
clock rate 64000
desc Serial To Router 5
!
router eigrp 10
redistribute rip metric 100000 100 255 255 1500
network 150.1.4.4 0.0.0.0
network 167.1.34.4 0.0.0.0
network 167.1.45.4 0.0.0.0
no auto-summary
eigrp router-id 150.1.4.4
!
.....
THX
Any help for me ?
Udo
> EIGRP set neighbor relation on IP from the same subnet. Probably on yuor
> ppp-link IP addresses from different networks.
>
> On Wednesday 29 November 2006 19:03, Udo wrote:
> > Hi GS
> >
> > I had the following environment
> >
> > R1-----(FR)----R3---(FR)----R5
> >
> >
> >
> > FR
> >
> >
> > R4
> >
> > R3 is as hub configured for R1 and R5 (ip address x.x.135.x)
> > And R4 is via point-to-point with R3 connected
> > All of this routers are configured with EIGRP
> >
> > On R3 I get the following message
> > ===============================
> > *Mar 1 01:54:27.157: IP-EIGRP(Default-IP-Routing-Table:10): Neighbor
> > 167.1.34.4 not on common subnet for Serial0/0
> > ==============================
> > S0/0 is the INterface which connects to R1/R5
> >
> > What should be the possible reason for this ?
> >
> > THX
> > Udo
> >
> >
> >
> >
> >
> >
> > ___________________________________________________________
> > Der fr|he Vogel fdngt den Wurm. Hier gelangen Sie zum neuen Yahoo! Mail:
> > http://mail.yahoo.de
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:49 ART