Re: VPN-Concentrator Question

From: WorkerBee (ciscobee@gmail.com)
Date: Wed Nov 29 2006 - 02:40:20 ART

I don't use the Quick Start Wizard. Then you can navigate to public filter to
remove ESP etc or you can disable it from Per User Group - IPSec
if IPSec is required for other user groups.

You can go ahead with Full Configuration via >>
Click here to go to the Main Menu link.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_getting_started_guide_chapter09186a00801f0aef.html#wp1067086

On 11/29/06, Lab Rat #109385382 <techlist01@gmail.com> wrote:
> Where do you see that selection? Do you mean from the Public *Filter*? If
> so, is that really the equivalent of doing so at the Quick start wizard?
>
>
> -----Original Message-----
> From: WorkerBee [mailto:ciscobee@gmail.com]
> Sent: Tuesday, November 28, 2006 9:30 PM
> To: Lab Rat #109385382
> Cc: cisco@groupstudy.com; Cisco certification; security@groupstudy.com
> Subject: Re: VPN-Concentrator Question
>
> Remove it from the Public Interface Filter.
>
>
> On 11/29/06, Lab Rat #109385382 <techlist01@gmail.com> wrote:
> > Does anyone know of a way to disable the IPSec protocol on the VPN-C
> > without using the Quick startup wizard?
> >
> > I see it gives you a choice in the Quick startup wizard, but I cannot
> > find how to disable it in the CLI or GUI.
> >
> > Thanks,
> >
> > Ed
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html

This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:49 ART