From: Dishan Gamage (dishanlg@gmail.com)
Date: Tue Nov 28 2006 - 00:32:41 ART
Hi Aaron,
Pls hav a look at my config
I have R5 connected to R2 and R6 via FR
R5 config ------>
interface Serial0/0/0.265 multipoint
ipv6 address FE80::5 link-local
frame-relay map ipv6 2111:256:256:256::6 506 broadcast
frame-relay map ipv6 FE80::2 502 broadcast
frame-relay map ipv6 FE80::6 506 broadcast
frame-relay map ipv6 2111:256:256:256::2 502 broadcast
R2 config ---->
interface Serial0/0/0
encapsulation frame-relay
ipv6 address FE80::2 link-local
clock rate 128000
frame-relay map ipv6 FE80::5 205 broadcast
frame-relay map ipv6 2111:256:256:256::5 205
no frame-relay inverse-arp
when i ping from R5 to R2 its unreachable
any wrong config that i hav made ????
pls advise
reg
dishan
On 11/28/06, Aaron Pilcher <apilcher@itgcs.com> wrote:
>
> Easy stuff.....there is no inarp for ipv6 yet so you have to map both the
> global and link locak addresses....
>
> Hope that is an easy fix for ya
>
> Aaron #17168
>
> -----Original Message-----
> From: "Dishan Gamage" <dishanlg@gmail.com>
> To: ccielab@groupstudy.com
> Sent: 11/27/2006 11:17 AM
> Subject: Ipv6 over Frame-relay
>
> Hi group
>
> can any one point out a good url, doc, that shows how to configure ipv6
> over
> FR pls..
>
> reg
>
> dishan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART