From: cadet (cadet22@gmail.com)
Date: Sun Nov 26 2006 - 06:37:16 ART
Thanks Ivan !
> IMO tagging route can be done only at originating roter. Therefore you can't
> retag or newly tag any route on any intermidiate router.
>> Hi GROUP !
>> I know that using "distribute-list route-map" in OSPF I may
>> permit/deny routes according the VALUE of the TAG.
>> Are there possibility change TAG VALUE specific routes based on the
>> INCOMING TAG VALUE ?
>>
>> For example, I want change INCOMING routes with TAG VALUE 333 to TAG
>> VALUE 777 using distribute-list route-map in.
>>
>> router ospf 1
>> distribute-list route-map metric in
>>
>> route-map test permit 10
>> match tag 333
>> set tag 777
>> route-map test permit 20
>>
>>
>> BEFORE:
>> r1#sh ip route 10.10.12.0
>> Routing entry for 10.10.12.0/24
>> Known via "ospf 1", distance 110, metric 124
>> Tag 333, type extern 1
>> Last update from 14.14.10.2 on Serial0/0, 00:00:02 ago
>> Routing Descriptor Blocks:
>> * 14.14.10.2, from 14.14.8.8, 00:00:02 ago, via Serial0/0
>> Route metric is 124, traffic share count is 1
>>
>>
>> AFTER:
>> r1#sh ip route 10.10.12.0
>> Routing entry for 10.10.12.0/24
>> Known via "ospf 1", distance 110, metric 124
>> Tag 333, type extern 1
>> Last update from 14.14.10.2 on Serial0/0, 00:00:02 ago
>> Routing Descriptor Blocks:
>> * 14.14.10.2, from 14.14.8.8, 00:00:02 ago, via Serial0/0
>> Route metric is 124, traffic share count is 1
>>
>> Are there any idea ?
>> How I may change this tag value ?
>>
>> Regards. Max.
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
-- Best regards, cadet mailto:cadet22@gmail.com
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART