RE: Monitoring a Line.

From: Victor Cappuccio (vcappuccio@desca.com)
Date: Fri Nov 24 2006 - 11:35:54 ART

Next message: Vincent Mashburn: "RE: OSPF bug"
Previous message: Vincent Mashburn: "RE: Question about SNAT configuration"
Maybe in reply to: Victor Cappuccio: "Monitoring a Line."
Next in thread: Josef A: "Re: Monitoring a Line."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thank you man It works real good

IP7PLC02# show archive log config all
idx sess user@line Logged command
    1 1 vcappuccio@vty1 | logging enable
    2 1 vcappuccio@vty1 | logging size 1000
    3 1 vcappuccio@vty1 | archive
    4 1 vcappuccio@vty1 | log config
    5 1 vcappuccio@vty1 | logging enable
    6 1 vcappuccio@vty1 | logging size 1000

-----Original Message-----
From: srdja blagojevic [mailto:srdja1@pexim.co.yu]
Sent: Viernes, 24 de Noviembre de 2006 10:23 a.m.
To: Victor Cappuccio; ccielab@groupstudy.com
Subject: RE: Monitoring a Line.

Victor,

I never tried this feature before, but I read about archive command, log
config suboption

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hc
f_r/
cfn_04h.htm#wp1034549

Available since 12.3(4)T.

This is maybe what you are looking for:

R1(config)#archive
R1(config-archive)#log config
R1(config-archive-log-cfg)#?
commands for controlling config logging:
  default Set a command to its defaults
  exit Exit from the log config submode
  hidekeys suppress output (e.g. passwords) when displaying logged
commands
  logging Modify config logging parameters
  no Negate a command or set its defaults
  notify Send logged commands to target applications

R1(config-archive-log-cfg)#logging ?
enable Enable the config logger
size Maximum number of logged commands that will be kept by the
config
log

HTH,
Srdja

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Victor Cappuccio
Sent: Friday, November 24, 2006 15:11
To: ccielab@groupstudy.com
Subject: Monitoring a Line.

Hi Guys, is there a Way to monitor what a user is doing in a Router,
without
using AAA?

IP7PLC02#show users

Line User Host(s) Idle Location

1 vty 0 sc idle 00:01:36
10.18.187.200

* 2 vty 1 vcappuccio idle 00:00:00 10.19.8.54

3 vty 2 vcappuccio idle 00:01:08 10.19.8.54

Thanks
Victor.-

Next message: Vincent Mashburn: "RE: OSPF bug"
Previous message: Vincent Mashburn: "RE: Question about SNAT configuration"
Maybe in reply to: Victor Cappuccio: "Monitoring a Line."
Next in thread: Josef A: "Re: Monitoring a Line."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART