From: haducbinh (haducbinh@vnpro.org)
Date: Fri Nov 24 2006 - 01:17:02 ART
Hi GS!
I'm using IOS Version 12.4(9)T1! I try to config OSPF neighbor between R5
and FRS on non-broadcast network but can not!
R5#sh run | begin router os
router ospf 1
router-id 172.16.105.1
log-adjacency-changes
area 10 nssa
redistribute rip subnets
network 172.16.35.5 0.0.0.0 area 0
network 172.16.50.5 0.0.0.0 area 10
network 172.16.105.1 0.0.0.0 area 105
this is Fas0/0 connect to FRS (172.16.50.20):
R5(config-router)#do sh run int fas0/0
interface FastEthernet0/0
ip address 172.16.50.5 255.255.255.0
ip ospf network non-broadcast
duplex auto
speed auto
end
and result:
R5(config-router)#neighbor 172.16.50.20
OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
networks
R5(config-router)#do sh ip os int fas0/0
FastEthernet0/0 is up, line protocol is up
Internet Address 172.16.50.5/24, Area 10
Process ID 1, Router ID 172.16.105.1, Network Type NON_BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
As you can see, network type is NON_BROADCAST but I can not enter neighbor
command on R5!
Then, I try to enter neighbor command on FRS, strange thing happen!
FRS use IOS Version 12.2(15)T14
The first: check ospf configuration:
FRS#sh run | begin router os
router ospf 1
router-id 7.7.3.1
log-adjacency-changes
area 10 nssa
redistribute connected subnets
network 7.7.2.1 0.0.0.0 area 10
network 7.7.3.1 0.0.0.0 area 10
network 172.16.50.20 0.0.0.0 area 10
The second, type neighbor command on FRS, it's ok!
FRS(config-router)#neighbor 172.16.50.5
And then, check OSPF configuration again, the neighbor command disappear??
It can create neighbor with R5, but when I reload all, I can not create
neighbor!
FRS(config-router)#do sh run | be router os
router ospf 1
router-id 7.7.3.1
log-adjacency-changes
area 10 nssa
redistribute connected subnets
network 7.7.2.1 0.0.0.0 area 10
network 7.7.3.1 0.0.0.0 area 10
network 172.16.50.20 0.0.0.0 area 10
Is this a bug of IOS or I did something wrong?
Thanks!
HaDucBinh
Mail: <mailto:haducbinh@vnpro.org> haducbinh@vnpro.org or
haducbinh@gmail.com
Phone: +84 908 191 322
---------------------------------------------------------------------------
Vietnamese Professionals (VnPro)
Cisco Authorised Training
149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh City
Tel: (08) 5124257 - (08) 5125314
Fax: (08) 5124314
Website: <http://vnpro.vn> http://vnpro.vn
Support Forum: <http://vnpro.org> http://vnpro.org
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART