From: Scott Morris (swm@emanon.com)
Date: Wed Nov 22 2006 - 12:21:18 ART
The 'redirect out' on the ethernet interface would imply that requests are
coming FROM different places. If your hosts are supposed to be on the same
interface (ethernet) then it will be an inbound redirect from the routers'
perspective.
As for the route-cache part, that's really an efficiency thing to not force
process switching on everything. In a lab, most likely nobody cares (e.g.
not a REQUIRED command) but in real life it would be a good thing to do.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Salman Abbas
Sent: Wednesday, November 22, 2006 6:42 AM
To: ccie >> Cisco certification
Subject: WCCP complexity
Hi Guys,
Please help to answer the following question:
R1----------------------------SW------------------------------Web Caching
System
R1 must intercept the http traffic coming to its ethernet interface and
redirect it towards the Web Caching engine. So first I'll use the following
two commands,
ip wccp web-cache
interface e0
ip wccp web-cache redirect out
Now since Im using the same interface (R1 e0) for both incoming web traffic
and outgoing web cache redirection, will it be necessary to use the command
int e0
*ip route-cache same-interface*
Will I need the above mentioned ip route-cache command or any additional
commands to meet the requirement of this question?
Thanks in advance,
Cheers!!!
Salman
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART