From: Nambi Appachigounder (nambi_gct@yahoo.co.in)
Date: Tue Nov 21 2006 - 23:26:42 ART
Do you have any secondry addresses configured.These
are the common situations for this issue.
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080093f09.shtml
regds,
nambi
--- deji500@hotmail.com wrote:
> Hi all,
>
> Can someone please tell me why i am getting this
> error message on this router even though Frame-relay
> inverse arp has been turned off on the DLCI
> associated with that this IP address:
>
> IP-EIGRP(Default-IP-Routing-Table:100): Neighbor
> 130.1.124.1 not on common subnet for Serial1/0
>
> This is the frame map statement on the router with
> the error:
> Rack1R3#sh frame map
> Serial1/0 (up): ip 130.1.234.2 dlci
> 516(0x204,0x8040), dynamic,
> broadcast,, status defined, active
> Serial1/0 (up): ip 130.1.234.4 dlci
> 518(0x206,0x8060), dynamic,
> broadcast,, status defined, active
> Serial1/1 (up): ip 130.1.35.5 dlci
> 910(0x38E,0xE0E0), static,
> broadcast,
> CISCO, status defined, active
>
>
> Thanks for your anticipated help
>
>
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART