From: Alex De Gruiter (Alex.deGruiter@didata.com.au)
Date: Tue Nov 21 2006 - 20:32:33 ART
It looks like the remote router interface is setup as 130.1.124.1,
however your Serial1/0 interface on the local router is setup as
130.1.234.2. EIGRP can't form an adjacency for neighbors that are not on
the same connected subnet.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
deji500@hotmail.com
Sent: Wednesday, 22 November 2006 9:49 AM
To: ccielab@groupstudy.com
Subject: EIGRP Hello packets
Hi all,
Can someone please tell me why i am getting this error message on this
router even though Frame-relay inverse arp has been turned off on the
DLCI associated with that this IP address:
IP-EIGRP(Default-IP-Routing-Table:100): Neighbor 130.1.124.1 not on
common subnet for Serial1/0
This is the frame map statement on the router with the error:
Rack1R3#sh frame map
Serial1/0 (up): ip 130.1.234.2 dlci 516(0x204,0x8040), dynamic,
broadcast,, status defined, active Serial1/0 (up): ip
130.1.234.4 dlci 518(0x206,0x8060), dynamic,
broadcast,, status defined, active
Serial1/1 (up): ip 130.1.35.5 dlci 910(0x38E,0xE0E0), static,
broadcast,
CISCO, status defined, active
Thanks for your anticipated help
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART