From: Joe Rinehart (jjrinehart@comcast.net)
Date: Tue Nov 21 2006 - 19:00:43 ART
Between the 4948 and 6504 and between both devices and the Ixia
-----Original Message----- From: David Prall [mailto:dcp@dcptech.com]
Sent: Tuesday, November 21, 2006 11:12 AM
To: 'Joe Rinehart'; 'Cisco certification'
Subject: RE: IPV6 OSPF Weirdness
Where is the IPv6 routing being done. If on the 4948 then it is all being
done in software.
David
-- David C Prall dcp@dcptech.com http://dcp.dcptech.com> -----Original Message----- > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On > Behalf Of Joe Rinehart > Sent: Tuesday, November 21, 2006 1:42 PM > To: 'Cisco certification' > Subject: IPV6 OSPF Weirdness > > Thought I would bounce this off everyone since it is driving me nuts. > > > > I have a 6504 and 4948 with a 4 link 802.1q L2 Etherchannel and an SVI > (VLAN1) for IPV6 routing. In addition I have an Ixia > appliance attached to > both devices using a 1 gig link. Everything works until I try to do > throughput testing, and the entire IPv6 OSPF process drops. > > > > Any insights? > > ______________________________________________________________ > _________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART