From: Heiko Liedtke (heiko.liedtke@gmx.net)
Date: Mon Nov 20 2006 - 14:14:09 ART
What about the following....
!
!
class map PREC_5
match ip precedence 5
!
!
policy-map LLQ
class PREC_5
priority 256
!
!
interface FastEthernet 0/1
service-policy output LLQ
!
!
LLQ has a built in policer to the value configured with the priority
command.
Heiko
Salman Abbas schrieb:
>Hi Guys,
>
>Here are two tricky QoS questions, atleast for me :). Please help to answer
>and provide the configs.
>
>1. Limit all traffic leaving interaface fa0/1 with IP precedence 5, to 256K.
>DO NOT USE POLICING OR RATE LIMITING. Also, DO NOT use an ACL to match on
>the IP precedence value.
>
>2. This question is about Traffic Classification on a Per-Port-Per-VLAN
>Basis using Class maps
>
>Your switch's port fa0/1 is assigned to VLAN 10. Mark all packets on VLAN 10
>with IP precedence flash.
>
>
>Thanks in advance,
>
>cheers!!!
>
>Salman
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART