From: Darby Weaver (darbyweaver@yahoo.com)
Date: Sat Nov 18 2006 - 16:45:02 ART
Nice List Anthony lots of gotchas!
Kewl
:)
--- anthony.sequeira@thomson.com wrote:
> Know Thy Options is a powerful expression that I
> picked up from
> NetMasterClass.
>
> Here was an options checklist that Group Study
> members helped me
> compile. This is probably pretty out of date and
> incomplete - but maybe
> you can add to it for your own upcoming date....
>
> Configuration Options
> 3550
> Load Balancing with STP
> Option 1 - STP cost - use on the downstream device
> Option 2 - Port Priority - use on the upstream
> device
>
> OSPF
> Advertising Masks for Loopbacks in OSPF
> Option 1 - OSPF network command
> Option 2 - Redistribute connected - Watch for Later
> Redistribution
> Issues
> Option 3 - Area Range command
> Troublshooting Neighbor Relationships in OSPF over
> NBMA
> Option 1 - OSPF network command
> Option 2 - Hello timer manipulation
> Connecting Area 0s in OSPF
> Option 1 - Virtual link
> Option 2 - GRE Tunnel - often needed when area
> between is a stub area
>
> Sending Unicast Updates in OSPF
> Option 1 - neighbor command and change network
> type/hello interval
>
> Load Balance in OSPF - change to equal cost
> Option 1 - use the bandwidth command
> Option 2 - ip ospf cost command
> Introducing a Network into OSFP without Updating
> Neighbor's LSDB
> Option 1 - no-advertise
> Option 2 - area filter-list
>
> MULTICAST
>
> Assigning RP in Multicast
> Option 1 - Static
> Option 2 - Auto-RP
> Option 3 - BSR Candidates
>
> QOS
>
> Setting the Frame-Relay DE Bit
> Option 1 - DE List
> Option 2 - Set action in policy map
> Option 3 - Police action
>
> Limiting Bandwidth in QoS for a Specific Host
> Option 1 - Rate-Limiting
> Option 2 - Policing
> Option 3 - Shaping
>
> RIP
>
> Changing RIP updates to Unicast
> Option 1 - Passive interface and neighbor command
> Option 2 - NAT the multicast address to a unicast
>
> Do Not Accept Prefixes - RIP
> Option 1 - Distribute list
> Option 2 - Offset list
> Option 3 - Administrative Distance
>
> BGP
>
> Device in Transit Path Not Running BGP
> Option 1 - GRE Tunnel
> Option 2 - Redistribute BGP into IGP
>
> BGP Traffic Flows
> Manipulate outbound traffic flows
> Option 1 - weight inbound
> Option 2 - Local preference inbound
>
> BGP Traffic Flows
> Manipulate inbound traffic flows
> Option 1 - AS-path prepend outbound
> Option 2 - MED outbound
>
> Advertise Prefix into BGP
> Option 1 - network statement
> Option 2 - Aggregate address statement
> Option 3 - Redistribution
> Option 4 - Conditional Route Injection
>
> REACHABILITY
>
> Reachability
> Option 1 - NAT
> Option 2 - Aggreagate
> Option 3 - Static
> Option 4 - Redistribution
> Option 5 - Policy Routing
> Option 6 - Default Route Generation
> Option 7 - Default Route
> Option 8 - Route-map
> Option 9 - Tunnel
>
> Anthony J. Sequeira
> #15626
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Dennis Worth
> Sent: Thursday, November 16, 2006 5:24 PM
> To: ccielab@groupstudy.com
> Subject: Last Minute Checklist?
>
> Hi All,
>
> It's almost time for 2nd attempt and I am
> anxiously awaiting. I just
> wanted ask anyone out there if they have one of
> those really cool last
> minute Checklist sheets that have helped many others
> on this list. I
> would like to make sure as much as possible that I
> don't brain fart on
> the basics. :0 )
>
>
> Thank You in Advance,
>
>
> Dec 1st 2006 SJ (2nd Attempt) - anyone else going to
> be there on this
> day?
>
> Dennis Worth
> Network Engineer
> Option One Mortgage
> Phone 949-790-3687
> dennis.worth@oomc.com
>
>
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART