From: Scott Morris (swm@emanon.com)
Date: Sat Nov 18 2006 - 15:41:51 ART
The 3550's don't support private vlans (release notes call it an "impending
feature") but private vlan edge would be testable (switchport protected).
As for the 1.0 comment, the R&S has changed MANY times over the years, it
would seem silly to me to call what we have now 1.0. The security perhaps
is different (although I still wouldn't have called the pre-2007 stuff 1.0,
but that's just my opinion!)....
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: Shaun Nicholson [mailto:shauninusa@geordiepride.com]
Sent: Saturday, November 18, 2006 1:16 PM
To: 'Scott Morris'; 'Kal Han'; 'Groupstudy'; 'Cisco certification'
Subject: RE: VLANs on the Switch
Scoot what do you mean by "who says we're on 1.0?"
I know there has been new hardware added into the labs recently such as
3560's but if you take the lab before Jan 1st you will still be tested on
the old blue print and hardware list right?
So I would presume as the 3550 did not do a full implementation of private
vlans for example they wont/cant test you on something not supported by the
standard hardware list or IOS revision. Am I correct to assume that?
Shaun Nicholson CCIE 6705
CCNP, CCSP, INFOSEC, JNCIA-M
-----Original Message-----
From: Scott Morris [mailto:swm@emanon.com]
Sent: Saturday, November 18, 2006 1:28 AM
To: 'Kal Han'; 'Groupstudy'; 'Cisco certification'
Subject: RE: VLANs on the Switch
Anything is fair game. Correct or incorrect stuff. (who says we're on
1.0?)
The blueprint says that a base config will be provided for you. That means
exactly what it says. If you have to fix things, I'm sure they'd make you
aware things need fixing. If you had to change things, they will make you
aware of that as well (although it may be a subtle description).
Especially now that topics like private vlans are in the lab, don't expect
that you won't need to create some vlans and do some vlan manipulation above
and beyond what they lay out for you.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Kal
Han
Sent: Friday, November 17, 2006 10:15 PM
To: Groupstudy; Cisco certification
Subject: VLANs on the Switch
Hi
>From what I understand from the blue print, we dont have to configure
>vlans
on the switch under normal circumstances. I mean unless there is some
questions to explicitly configure any thing related to VLANs we dont need to
touch it.
Is this right ??
Atleast a messed up switch (vlan) config to troubleshoot is not part of the
current V1.0 exam. Is that right ?
Thanks
Kal
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART