From: david robin (robindavi@gmail.com)
Date: Sat Nov 18 2006 - 07:29:10 ART
the link is on the command reference
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/timc_r/mlt_i1ht.htm#wp1073735
it seems to be wrong
On 11/16/06, Jian Gu <guxiaojian@gmail.com> wrote:
>
> The example is just simply wrong, it should be a unicast IP address.
>
> On 11/16/06, david robin <robindavi@gmail.com > wrote:
>
> > Dear all,
> > when reading on DOC cd I found the following configuration example:
> >
> > Examples
> >
> > The following example configures all sources via a single interface (in
> > this
> > case, a tunnel):
> >
> > ip mroute 224.0.0.0 255.255.255.255 tunnel0
> >
> >
> > but I don't know what is the mean of it
> >
> > as far as I know that the ip mroute command is applied in case that
> > rpf check on a unicast address ( source or RP) is not on the recieved
> > multicast interface and you want to overcome that.and 224.0.0.0 is a
> > multicast address can any one tell me why i use such example
> >
> >
> >
> > thanks,
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART