From: Adhu Ajit (adhu_ajit@yahoo.com)
Date: Thu Nov 16 2006 - 22:53:02 ART
Marvin, in your config, you seem to mark the frame-relay connection as "dce". How does the other side of the config look ? Because it can't be a "dce" on both ends. I'm assuming that the other side has pretty much the same config without the DCE or are there any other caveats ?
Thank you.
Marvin Greenlee <marvingreenlee@yahoo.com> wrote:
Config is fairly straightforward.
**********
frame-relay switching
interface MFR1
no ip address
frame-relay intf-type dce
!
interface MFR1.32 point-to-point
ip address 150.50.69.1 255.255.255.252
frame-relay interface-dlci 32
interface Serial0/2/0
no ip address
encapsulation frame-relay MFR1
clock rate 2000000
!
interface Serial0/2/1
no ip address
encapsulation frame-relay MFR1
clock rate 2000000
**********
What specific questions do you have about the feature?
Thanks,
Marvin
--- Adhu Ajit wrote:
> Is this an item that one should consider covering
> for the lab exam ?
>
> The Cisco documentation on this is not very
> adequate; hence, not able to get a grasp of this
> feature.
>
> Thanks.
>
>
> ---------------------------------
> Access over 1 million songs - Yahoo! Music
> Unlimited.
>
>
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART