From: Robert Jones (trevelle@wowway.com)
Date: Wed Nov 15 2006 - 03:13:59 ART
Ops. I cannot get the switch to boot its running config from the tftp
server. I can have it write to it every time I run a wri mem. Every time I
reload the switch it asked me to put in configs in manually.
Does anyone no the commands to have a 3500 xl boot it configs from a tftp
server?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Robert Jones
Sent: Tuesday, November 14, 2006 11:19 PM
To: trevelle@wowway.com; ccielab@groupstudy.com
Subject: RE: boot config file from tftp server Cat 3500
I figured it out. Thx in advance.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
trevelle@wowway.com
Sent: Tuesday, November 14, 2006 10:33 PM
To: ccielab@groupstudy.com
Subject: boot config file from tftp server Cat 3500
Can anyone tell me the command syntax to boot a 3500 config file from a tftp
server. I want the device to boot its running config from a tftp server
evertime it is reloaded. Thx.
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART