From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Nov 15 2006 - 02:50:13 ART
The EtherSwitch module NM-16ESW basically acts like the layer 2 and layer 3 switching functions of the 3550. Create VLANs in the VLAN database and apply them to the interfaces to create your broadcast domains. Configure trunk links between SW1 and SW2 to span these broadcast domains across both devices.
HTH,
Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
________________________________________
From: Michael Zuo [mailto:mzuo@ixiacom.com]
Sent: Tuesday, November 14, 2006 11:36 PM
To: Brian McGahan
Cc: ccielab@groupstudy.com
Subject: Running Dynagen with IE topology
Hi Brian,
Just a quick question, for the IE topology you posted for Dynagen, SW1 and SW2 are simulated as routers. To be able to have connectivity between routers, we need to configure bridging on SW1 and SW2 to simulate VLAN, correct? Or there is a simpler way?
thanks
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART