From: Brad Ellis (brad@ccbootcamp.com)
Date: Tue Nov 14 2006 - 12:41:21 ART
marc,
didn't you say the XMs have 16mb of flash on the mainboard? you can then
add 32mb of flash and get 48mb total. correct marc?
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
Network Learning Inc - A Cisco Sponsored Organization (SO)
YES! We take Cisco Learning credits!
brad@ccbootcamp.com
www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
Voice: 702-968-5100
FAX: 702-446-8012
----- Original Message -----
From: "Alexei Monastyrnyi" <alexeim@orcsoftware.com>
To: <thomas.rader@freesurf.ch>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, November 14, 2006 6:33 AM
Subject: Re: Flash capacity on a 2600XM's
Hi.
It should be 16Mb non-removable Flash on all models.
http://www.memorydealers.com/bserome262621.html
You just need to create a single FS across it.
HTH
A.
thomas.rader@freesurf.ch wrote:
> Hi,
>
> According to the Cisco documentation, 2600XM's can have up to 48 Mb of
> Flash.
>
> I don't think you get 48Mb Flash modules and the problem I have is that
> the 2600XM only has one Flash slot on the motherboard. I've got 32Mb
> modules installed, and it only shows me 32Mb.
>
> Do some models have a built in 16Mb Flash, or how does this work ?
>
>
> Thanks,
> Thomas Rader
>
> thomas.rader@freesurf.ch
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:46 ART