From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon Nov 13 2006 - 03:07:59 ART
In the lab you can either connect directly to the console of the access
server or connect to the console of each device through the access
server. So it's either one window or ten windows now ;-)
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Jones
Sent: Sunday, November 12, 2006 9:50 PM
To: Ben Holko
Cc: ccielab@groupstudy.com
Subject: Re: How To Run Cisco IOS On Your PC (Dynamips Router Emulator)
I guess I was looking for just having one terminal window open and a
scenario as close to the lab test as possible.
John
On 11/12/06, Ben Holko <ben.holko@globalcenter.net.au> wrote:
>
> just out of interest, why bother with binding to any nic? just "telnet
R1"
> from the dynagen prompt - that's how I do it
>
>
>
> ________________________________
>
> From: nobody@groupstudy.com on behalf of Brian McGahan
> Sent: Mon 11/13/2006 3:27 PM
> To: John Jones
> Cc: ccielab@groupstudy.com
> Subject: RE: How To Run Cisco IOS On Your PC (Dynamips Router
Emulator)
>
>
>
> Hi John,
>
> I had trouble connecting Dynamips to my physical NIC, while
others
> have not, so I moved the TermServ config to the MS Loopback. It
appears to
> be hardware specific. Also do you have any type of firewall software
> running on your PC that would be blocking telnet to those ports? Try
> posting your config on http://hacki.at/7200emu/ as the coder(s) of the
> software package actively participate there.
>
>
> HTH,
>
> Brian McGahan, CCIE #8593 (R&S/SP)
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com <http://www.internetworkexpert.com/>
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com <
> http://forum.internetworkexpert.com/>
> Live Chat: http://www.internetworkexpert.com/chat/
>
> ________________________________________
> From: John Jones [mailto:acer0001@gmail.com]
> Sent: Sunday, November 12, 2006 8:11 PM
> To: Brian McGahan
> Cc: Victor Cappuccio; Josh Wisman; walberto ralon;
ccielab@groupstudy.com
> Subject: Re: How To Run Cisco IOS On Your PC (Dynamips Router
Emulator)
>
> BTW, I can ping the MS loopback from the TermServ and R1 and R2
routers
> that I am testing with are active and I can get to them with SecureCRT
from
> the Windows host.
>
> Thanks.
>
> John
>
>
>
> On 11/12/06, John Jones <acer0001@gmail.com> wrote:
> Brian M. I was going to ask about the TermServ. I have installed the
MS
> loopback interface, got the device ID for it and added to the .net
file.
> When I started the TermServ through Dynagen, it started fine, but when
I
> went to connect to other routers via host names (R1, R2, etc.) it
doesn't
> seem to have a connection to each router. I have made the IP address
of the
> MS loopback adapter 192.168.123.30 for the TermServ e0/0 network.
Isn't it
> supposed to go to the MS loopback adapter and then the port number
outside
> of the Dynamips environment? Am I missing something?
>
> Thanks in advance for your help.
>
> John
>
>
>
> On 11/12/06, Brian McGahan <bmcgahan@internetworkexpert.com > wrote:
> The newest version of Dynamips (0.2.6-RC2-x86) is fairly stable
> with the Etherswitch module, and it is supported in the newest version
> of Dynagen. The .net files I put together for the IEWB-RS topology
use
> NM-16ESW on SW1 and SW2 in place of the 3550s. There are some minor
> syntax differences but overall they accomplish the same functionality.
> You can find the .nets here:
> http://www.internetworkexpert.com/resources/ccie-hardware.htm . Also
I
> just added a terminal server instance that you can use to reverse
telnet
> to all the Dynamips instances.
>
>
> HTH,
>
> Brian McGahan, CCIE #8593 (R&S/SP)
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com <http://www.internetworkexpert.com/>
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com <
> http://forum.internetworkexpert.com/>
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto: nobody@groupstudy.com] On
Behalf
> Of
> > Victor Cappuccio
> > Sent: Sunday, November 12, 2006 5:08 PM
> > To: Josh Wisman; walberto ralon; ccielab@groupstudy.com
> > Subject: RE: How To Run Cisco IOS On Your PC (Dynamips Router
> Emulator)
> >
> > But you can use -P 3600 in Dynamips and load a 3640 Image with a
> > NM-16ESW module or u can use Dynagen as well (IMO I prefer to use
> > Dynamips only is much better since it seems to understand the
idle-pc,
> > while Dynagen does not, at lease in my case, but it works very good)
> >
> > More information here http://www.ipflow.utc.fr/blog/
> >
> > Regards
> > Victor.-
> >
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Josh Wisman
> > Sent: Domingo, 12 de Noviembre de 2006 06:21 p.m.
> > To: walberto ralon; ccielab@groupstudy.com
> > Subject: Re: How To Run Cisco IOS On Your PC (Dynamips Router
> Emulator)
> >
> > that would be nice...
> >
> > On 11/12/06, walberto ralon < wralon@gmail.com > wrote:
> > >
> > > Does anybody know if there are plans to include Catalyst 3550/3570
> > > emulators
> > > anytime soon?
> > >
> > > On 11/12/06, John Jones < acer0001@gmail.com> wrote:
> > > >
> > > > Press F6 at the main screen once it boots, replace the
persistent
> > option
> > > > with acpi=off and hit Enter. I had to use this to get it to boot
> for
> > me.
> > > > Works fine afterwards. This is mentioned on his website at the
> > bottom of
> > > > the
> > > > Live CD instructions.
> > > >
> > > > This is a fine work Paul has done. With a few more enhancements,
> > this CD
> > > > would replace my router rack that I study the IE with.
> > > >
> > > > John
> > > >
> > > >
> > > > On 11/12/06, Schulz, Dave < DSchulz@dpsciences.com> wrote:
> > > > >
> > > > > Has anyone had any success with running this as the CD option.
> I
> > > tried
> > > > > burning this on to CD and it doesn't appear to be able to
boot.
> > Any
> > > > > help on this would be appreciated. TIA.
> > > > >
> > > > >
> > > > > Dave Schulz,
> > > > > Email: dschulz@dpsciences.com
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > Behalf
> > > Of
> > > > > Paul Borghese
> > > > > Sent: Friday, November 10, 2006 11:29 PM
> > > > > To: ccielab@groupstudy.com
> > > > > Subject: Re: How To Run Cisco IOS On Your PC (Dynamips Router
> > > Emulator)
> > > > >
> > > > > There is an easier way. Go to http://www.virtualpod.org <
> http://www.virtualpod.org/> . There
> > is a
> > > > > live CD you can download with everything installed and ready
to
> > go.
> > > > > Plus some video on how to get things up and running.
> > > > >
> > > > > I wrote a gui front end which manages IOS images and labs.
> > > > >
> > > > > It is still beta-ware so please send me bug
reports/suggestions.
> > > > >
> > > > > Take care,
> > > > >
> > > > > Paul Borghese
> > > > >
> > > > >
> > > > >
> > > > > On Fri, 2006-11-10 at 16:29 -0500, Brian McGahan wrote:
> > > > > > I've been getting lots of offline requests lately to
> post
> > the
> > > > > > Internetwork Expert topologies in Dynamips/Dynagen form, so
> I've
> > > > > created
> > > > > > a white paper about it:
> > > > > >
> > > > > > http://www.internetworkexpert.com/resources/iosonpc.htm
> > > > > >
> > > > > > For those of you unfamiliar with the software package
> you
> > can
> > > > > > use it to boot real IOS images for the 7206, 3620, 3640, and
> > 3660 on
> > > > > > your desktop PC to create a CCIE lab environment.
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > Brian McGahan, CCIE #8593 (R&S/SP)
> > > > > > bmcgahan@internetworkexpert.com
> > > > > >
> > > > > > Internetwork Expert, Inc.
> > > > > > http://www.InternetworkExpert.com <
> http://www.internetworkexpert.com/>
> > > > > > Toll Free: 877-224-8987 x 705
> > > > > > Outside US: 775-826-4344 x 705
> > > > > > 24/7 Support: http://forum.internetworkexpert.com <
> http://forum.internetworkexpert.com/>
> > > > > > Live Chat: http://www.internetworkexpert.com/chat/
> > > > > >
> > > > > >
> > > > >
> > >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:46 ART