From: Povarenkin, Igor (ipov@amt.ru)
Date: Fri Nov 10 2006 - 03:50:33 ART
>>> Is there an IOS version for 2620 with 64/16MB Memroy/Flash, that can
>>> support OSPFv3,
>>> or is there a way to run 20MB IOS(IP Plus) from a tftp server.
>>> or should I upgrade the flash or memory or both to run the 2620 IP
Plus
>>> image which supports OSPFv3
> Here is the link:
>
> http://www.internetworkexpert.com/resources/tftpdnld.htm
>
> HTH,
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
================
R#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.3(13a), RELEASE
SOFTWARE (fc2)
cisco 2611 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
of memory
16384K bytes of processor board System flash (Read/Write)
================
c2600-is-mz.123-13a.bin is the 2610XM image required 64 / 32, loaded
through
"tftpdnld -r" from rommon, see Brian's link please.
OSPFv3 supported by this image.
Igor
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:46 ART