Re: Rate-Limiting Question

From: Petr Lapukhov (petr@internetworkexpert.com)
Date: Wed Nov 08 2006 - 07:23:23 ART

"police rate" is used for control plane policing

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122s/122snwft/release/122s18/gtrtlimt.htm#wp1027129

2006/11/8, Lab Rat #109385382 <techlist01@gmail.com>:
>
> If I'm trying to rate-limit traffic using a policy-map rather than
> interface
> rate-limiting.
>
> What's the difference between:
>
>
> Router(config-pmap-c)#police ?
> <8000-2000000000> Bits per second <<<<<<<THIS OPTION
> cir Committed information rate
> rate Specify police rate <<<<<<<THIS OPTION
>
>
> For example, using the second option, if I set the statement to "police
> rate
> 128000 bps conform-action transmit exceed action drop", what's the
> different
> with just setting that bps in the first option?
>
> Thanks,
>
> Ed
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> 

-- 
Petr Lapukhov, CCIE #16379
petr@internetworkexpert.com

Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344

This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART