From: srdja blagojevic (srdja1@pexim.co.yu)
Date: Wed Nov 08 2006 - 00:03:14 ART
You should specify the name, that you will use on R1 when downloading the
image from R2.
R2: tftp-server flash: c2600-.......bin alias zuo2600
R1: copy tftp flash
remote host: R2
file name: zuo2600
HTH
Srdja
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Michael Zuo
Sent: Tuesday, November 07, 2006 17:11
To: ccielab@groupstudy.com
Subject: "alias" parameter for the tftp-server command
Hi there,
If I want to boot R1 with an image on R2, what alias should I specify in the
following command?
R2:
Tftp-server flash:[some image] alias [what should I put in here]
The doc CD says: Specifies an alternate name for the file that the TFTP
server uses in answering TFTP Read Requests.
But how do I know what image name R1 will request in its TFTP read request?
Is there a default value R1 will be looking for if it can not find any image
on its own flash?
thanks
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART