From: Lab Rat #109385382 (techlist01@gmail.com)
Date: Tue Nov 07 2006 - 23:45:41 ART
Totally stubby?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tandou Mohamed
Sent: Tuesday, November 07, 2006 6:41 PM
To: ccielab@groupstudy.com
Subject: OSPF
Hello everyone,
i am doing this Lab i need some input.
Question 1 states to configure ospf area 0 between two routers.
R6 is configured with area 0 with R9
R6 has his Ethernet configured in area 1 and loopback0 in area 6
R9 should not receive any type-3 LSA.
I tried area filtering to block type 3 LSA looks like it is not working
router ospf 1
router-id 192.168.9.9
log-adjacency-changes
area 9 filter-list prefix LSA3 in
network 172.31.69.0 0.0.0.15 area 0
network 192.168.9.9 0.0.0.0 area 9
ip prefix-list LSA3 seq 5 permit 172.31.69.0/30 ip prefix-list LSA3 seq 10
deny 0.0.0.0/32
Question 2 states to enable eigrp between R7 and R8
Configure R8 such that R7 will not send queries for any routes that are
not directly attached to R8.
Should i use EIGRP STUB connected?
Any input and explanation will be appreciated
Thanks
---------------------------------
Everyone is raving about the all-new Yahoo! Mail.
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART