From: Chris Jenkins (chrisjenkins@hotmail.com)
Date: Tue Nov 07 2006 - 15:59:01 ART
Hmmm... you could have a point! Are these the kind of questions I should be
expecting in the lab?
> Subject: RE: Denying telnet to port 23 on VTY> Date: Tue, 7 Nov 2006
22:35:22 +1100> From: ben.holko@globalcenter.net.au> To: secondie@gmail.com;
security@groupstudy.com; ccielab@groupstudy.com> > What seems to be a
recurring theme in lab questions - think outside the> square> > If you have
typed the question below correctly, then you should use the> rotary command,
and then "telnet input ssh"> > But this will disable telnet......shock-horror,
that is what the> question (notably the "deny all") is asking you to do:> > >
Enable VTY to accept telnet on port 3003 and deny all telnet access to> VTY.
ACL not allowed.> > It says "deny all telnet access", not "deny all telnet
access on port> 23"> > B.> > > -----Original Message-----> From:
nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of> secondie>
Sent: Tuesday, November 07, 2006 1:05 PM> To: security@groupstudy.com;
ccielab@groupstudy.com> Subject: Denying telnet to port 23 on VTY> > Question
asks for: Enable VTY to accept telnet on port 3003 and deny> all telnet access
to VTY. ACL not allowed.> > 3003 part is easy, use rotary but can port 23 be
disabled on VTY line so> that telnet is not accepted on the VTY line?> > For
those that have trinet security lab workbook, (Trinet superlab-1,> section
8.5, task#1)> > > -secondie> >
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART