From: Ben Holko (ben.holko@globalcenter.net.au)
Date: Tue Nov 07 2006 - 08:35:22 ART
What seems to be a recurring theme in lab questions - think outside the
square
If you have typed the question below correctly, then you should use the
rotary command, and then "telnet input ssh"
But this will disable telnet......shock-horror, that is what the
question (notably the "deny all") is asking you to do:
> Enable VTY to accept telnet on port 3003 and deny all telnet access to
VTY. ACL not allowed.
It says "deny all telnet access", not "deny all telnet access on port
23"
B.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
secondie
Sent: Tuesday, November 07, 2006 1:05 PM
To: security@groupstudy.com; ccielab@groupstudy.com
Subject: Denying telnet to port 23 on VTY
Question asks for: Enable VTY to accept telnet on port 3003 and deny
all telnet access to VTY. ACL not allowed.
3003 part is easy, use rotary but can port 23 be disabled on VTY line so
that telnet is not accepted on the VTY line?
For those that have trinet security lab workbook, (Trinet superlab-1,
section 8.5, task#1)
-secondie
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART