From: WorkerBee (ciscobee@gmail.com)
Date: Tue Nov 07 2006 - 01:08:57 ART
/32 is only by default for OSPF off the loopback interface. Since OSPF
by default classify loopback as host route.
Since the loopback network is 8.8.8.0/24, I think the question is making sure,
R1 and R2 see a /24 route, not a summary /22.. or host route /32 to
reach 8.8.8.0/24.
Load balancing should be fine.
On 11/7/06, Adhu Ajit <adhu_ajit@yahoo.com> wrote:
> Folks, this might be a dumb question but I'm stumped:
>
> I have an exercise in my workbook that says:
>
> On R8, create a loopback interface with 8.8.8.8/24 and advertise it into EIGRP. The EIGRP neighbors R1 and R2 should see a specific route for R8's loopback interface.
>
> By specific route, does this mean a /32 route instead of a /24 route or does this mean that R1 and R2 should see one route (no load balanced paths) to the loopback network.
>
> How do I do a /32 out of a /24?
>
> Thanks.
>
>
> ---------------------------------
> Sponsored Link
>
> Mortgage rates near historic lows: $150,000 loan as low as $579/mo. Intro-*Terms
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART