From: secondie (secondie@gmail.com)
Date: Tue Nov 07 2006 - 00:27:30 ART
transport input ssh ... will also kill telnet via 3003 :-(
dszarmach wrote:
> Try the 'transport' command under the line....'transport input ssh' will
> allow encrypted mgmt via ssh and kill telnet, without ACL
>
> -
> Doug
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> secondie
> Sent: Monday, November 06, 2006 8:05 PM
> To: security@groupstudy.com; ccielab@groupstudy.com
> Subject: Denying telnet to port 23 on VTY
>
> Question asks for: Enable VTY to accept telnet on port 3003 and deny
> all telnet access to VTY. ACL not allowed.
>
> 3003 part is easy, use rotary but can port 23 be disabled on VTY line so
>
> that telnet is not accepted on the VTY line?
>
> For those that have trinet security lab workbook, (Trinet superlab-1,
> section 8.5, task#1)
>
>
> -secondie
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> ____________________________________
>
> This message and attachment(s), if any, is intended for the sole use of the individual and/or entity
> of which it is addressed, and may contain information that is privileged,confidential and prohibited
> from disclosure under applicable law. If you are not the addressee, or authorized to receive this on
> behalf of the addressee, you are hereby notified that you may not use, copy, disclose or distribute
> to anyone this message or any part thereof. If you have received this in error, please immediately advise
> the sender by e-mail and delete this information and all attachments from your computer and network.
> Thank you.
> ____________________________________
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART