From: Venkataramanaiah.R (vramanaiah@gmail.com)
Date: Mon Nov 06 2006 - 17:47:06 ART
Brian, this looks like a good option, but i guess this is supported on
limited platforms and latest IOS..
We are running some IOS which is atleast two years old and i am
looking at doing this on MSFC at one end and 3745 on the other end, so
i will need to explore the support..
-Venkat
On 11/6/06, Brian McGahan <bmcgahan@internetworkexpert.com> wrote:
> Yes you can do this. If your transit network is pure IPv4 you
> can run L2TPv3. If your transit network is running MPLS you can run
> AToM. L2TPv3 is a very quick any easy way to accomplish this as opposed
> to implementing MPLS just for this purpose. You simply configure L2TPv3
> tunnels between the border routers and all traffic (IPv4, IPv6, IPX,
> NetBIOS, etc) received in the Ethernet interfaces will be tunneled over
> to the other side of the link. Check here for configuration examples:
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hw
> an_c/hl2tpv3.htm#wp1046175
>
>
> HTH,
>
> Brian McGahan, CCIE #8593 (R&S/SP)
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Venkataramanaiah.R
> > Sent: Monday, November 06, 2006 11:09 AM
> > To: ccielab@groupstudy.com
> > Subject: Bridging over IP
> >
> > Hi,
> >
> > I would like to bridge two ethernet segments over an IP cloud...
> >
> > Is this possible? If yes, what options do i have..
> >
> >
> > Regards
> > -Venkat
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART