RE : RE : Multipoint GRE Tunnel and FR

From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Sun Nov 05 2006 - 11:24:14 ART


I am using Dynamips

-- Richard

-----Message d'origine-----
De : nobody@groupstudy.com [mailto:nobody@groupstudy.com] De la part de Rodrigo Paes
Envoyi : Sunday, November 05, 2006 2:19 PM
@ : security@groupstudy.com; ccielab@groupstudy.com
Objet : Re: RE : Multipoint GRE Tunnel and FR

On Sun, 5 Nov 2006 12:54:49 -0000
"Richard Dumoulin" <Richard.Dumoulin@vanco.fr> wrote:

> Hi Rodrigo,
>
> I tried your config and for me it worked. When I first built the tunnel it did not come up and I was having "encapsulation failed" messages on the debug ip nhrp on R5 so I deleted the tunnel on R2 and paste it back.
> You did not send the config off R5 so I had to guess it:
>

<snip>
 
> Rack1R5#sh run int se 1/0.1245
> Building configuration...
>
> Current configuration : 188 bytes
> !
> interface Serial1/0.1245 multipoint
> ip address 136.1.0.5 255.255.255.0
> ip ospf network point-to-multipoint
> frame-relay map ip 136.1.0.2 201 broadcast
> no frame-relay inverse-arp
> end
>
!
interface Serial2/0.1245 multipoint
 ip address 136.1.0.5 255.255.255.0
 ip ospf network point-to-multipoint
 frame-relay map ip 136.1.0.1 501 broadcast
 frame-relay map ip 136.1.0.2 502 broadcast
 frame-relay map ip 136.1.0.4 504 broadcast
 no frame-relay inverse-arp
end

> Rack1R5#sh run int tun 1245
> Building configuration...
>
> Current configuration : 237 bytes
> !
> interface Tunnel1245
> ip address 100.0.0.5 255.255.255.0
> no ip redirects
> ip nhrp authentication CISCO
> ip nhrp map multicast dynamic
> ip nhrp network-id 1245
> tunnel source Loopback1
> tunnel mode gre multipoint
> tunnel key 1245
> end
!
interface Tunnel1245
 ip address 100.0.0.5 255.255.255.0
 no ip redirects
 ip mtu 1400
 ip nhrp authentication CISCO
 ip nhrp map multicast dynamic
 ip nhrp network-id 1245
 ip nhrp holdtime 30
 tunnel source Loopback0
 tunnel mode gre multipoint
 tunnel key 1245
end

well , there isn't any significant changes, are u using real routers or dynamips ?

[]s
rodrigo

-- 
=========================================
\     .-.     +++ Rodrigo Paes +++       \
/     /v\    CCIE #14054 (R&S and SP)    /
\    // \\   LPIC2 #19753                \ 
/   /(   )\  Linux User #324449          /
\    ^^-^^                               \
/   jabber: panfleto@jabber.org          /
\   gtalk : rodp43s@gmail.com            \
 ==========================================


This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART