From: Alexey Tolstenok (alextols@gmail.com)
Date: Sat Nov 04 2006 - 07:31:34 ART
I've tried this scenario and still have no idea how to accomplish this
state. First I define area 12 betw. R1, R2 then virtual-link between R1 and
R2 and after that area 13 on R2, R3
But virtual-link isn't even try to come up. What I'm doing wrong?
2006/11/4, Brian Dennis <bdennis@internetworkexpert.com>:
>
> Here is an example of an OSPF network with only two non-zero areas
> working using a virtual-link. The configuration is: R1 <-Ethernet-> R2
> <-Serial-> R3. Area 12 is between R1 and R2. Area 13 is between R2 and
> R3. There is a virtual-link between R1 and R2 across area 12.
>
> If you try to build this network yourself be sure to create the first
> OSPF area then the virtual link before adding on the second OSPF area.
>
>
-- SY, Alexey
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART