CCIE Recertification Question of the Week - NOV0306

From: anthony.sequeira@thomson.com
Date: Fri Nov 03 2006 - 11:05:58 ART


Congrats to Nick Davey [nicky.davey@gmail.com] for winning the Cisco
Press title last week!

We will randomly draw again this week from the responses sent to
anthony.sequeira@thomson.com. The winner will receive the CCIE Routing
and Switching Flash Cards and Exam Practice Pack from Cisco Press.

SPECIAL NOTE:

Review the answer here carefully - for the first time last week - a
majority of the respondents where incorrect!

LAST WEEK'S RESPONSES:

A - 25%

B - 75%

C - 0%

D - 0%

LAST WEEK'S ANSWER:

Answer: a

Topic Domain: 2b

Issue:

Given the show spanning-tree command output, how can you determine what
version of STP is in use?

Solution:

The show spanning-tree output might look like Rapid Spanning Tree is in
use. This is because port states reported reflect 802.1w options.
Notice, however, that the spanning tree version reported is IEEE. This
is the indication for 802.1d.

More Information:

show spanning-tree

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/cr/cl
i2.htm#wp3427263

LAST WEEK'S QUESTION:

2-5-2. Examine the Catalyst switch output shown in Exhibit 1. What
version of STP is in use on this switch?

a. 802.1d

b. 802.1w

c. 802.1s

d. 802.1q

Exhibit 1

ASW1#show spanning-tree vlan 1

VLAN0001

  Spanning tree enabled protocol ieee

  Root ID Priority 32769

             Address 000d.28c6.6800

             Cost 19

             Port 2 (FastEthernet0/2)

             Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

  Bridge ID Priority 32769 (priority 32768 sys-id-ext 1)

             Address 000d.2903.8980

             Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

             Aging Time 300

Interface Role Sts Cost Prio.Nbr Type

---------------- ---- --- --------- --------
--------------------------------

Fa0/1 Altn BLK 19 128.1 P2p

Fa0/2 Root FWD 19 128.2 P2p

THIS WEEK'S QUESTION:

5-7-2. You have configured traffic shaping in your Frame Relay WAN
environment. As part of this configuration you have configured your
router to respond to BECN frames received. By what percentage will your
router reduce the rate of transmission if a BECN frame is received?

a. 10%

b. 20%

c. 25%

d. 40%

e. 45%

f. 50%

Question of the Week Compliments of:

TESTiT

http://www.netmasterclass.com/site/written.php



This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART