From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Tue Oct 31 2006 - 19:02:36 ART
RIP Ethernet LAN... does it know how to get to OSPF domain?
A.
Adam Frederick wrote:
> I have a Hub & Spoke FR Cloud utilizing the OSPF Non-Broadcast network
> type. There is a PPP link hanging off of the Hub router connecting to a
> stub router. There is an Ethernet link hanging off of the Spoke that is
> bringing RIP routes into OSPF. For example 190.17.1.0 through
> 190.17.6.0. I'm using the "summary-address 190.17.1.0 255.255.248.0"
> command to summarize these routes on the ASBR (Spoke) so I only have 1
> route in the OSPF domain. I do get the route installed in my routing
> tables, however the IP's are unreachable from every device except the
> spoke that is redistributing. Any suggestions right off as to why it
> would install the route but be unreachable? The Ethernet is reachable,
> but not beyond that when I do a traceroute.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:07 ART