From: Hulbert, Jerry (Jerry.Hulbert@flukenetworks.com)
Date: Tue Oct 31 2006 - 15:37:23 ART
Hi Mohamed,
What interfaces does R3 use to forward IP traffic toward R6? What
interfaces are configured with PIM on R3 and R2?
Jerry
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mohamed Saeed
Sent: Tuesday, October 31, 2006 10:56 AM
To: ccielab@groupstudy.com
Subject: IEWB - Ver 3 - Lab 2 - Task 6.2
Hi All,
In this task, it is required to configure SW1 VLAN interface to join the
multicast group 228.28.28.28 and to make sure that SW1 will respond to
ping destined to that address. I could ping that address from all
multicast routers except R6.
I have configured the following static mroute on R3 to have a successful
RPF check of the RP address:
ip mroute 150.1.2.2 255.255.255.255 132.1.0.2
I am sure that I miss something that may be related to RPF but I could
not get it. Wondering if someone could help with this task.
Kind Regards
Mohamed Saeed, CCNP - CCIP
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:07 ART