From: Venkataramanaiah.R (vramanaiah@gmail.com)
Date: Mon Oct 30 2006 - 13:53:19 ART
Brian, I like your advise, but i cannot do that, i want this
intercommunication to around via both routers..
It is a strange topology that we are trying to build upon here, with
legacy telcom hosts. So bear with me for that ;-)
thanks
On 10/30/06, Brian McGahan <bmcgahan@internetworkexpert.com> wrote:
> You will only reply with proxy-arp if you have a route to the requested
> host's subnet. Remove router 1's route to subnet 2 and remove router
> 2's route to subnet 1 and you will see the desired behavior.
>
>
> HTH,
>
> Brian McGahan, CCIE #8593 (R&S/SP)
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Venkataramanaiah.R
> > Sent: Saturday, October 28, 2006 1:09 PM
> > To: ccielab@groupstudy.com
> > Subject: Proxy-Arp with two routers on a segment..
> >
> > I have a requirement where there will be two routers on the same
> > segment supporting two different subnets... The segments have hosts
> > belonging to both these subnets..
> >
> > I want to enforce the following..
> >
> > Router 1 must respond to proxy-arp request only from hosts belonging
> > to Subnet 1.
> >
> > Router 2 must respond to proxy-arp request only from hosts belonging
> > to Subnet 2.
> >
> > Is there a way out..? I cant think of any way to achieve this, so
> > thought i will ask the experts :-)
> >
> >
> > Regards
> > -Venkat
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:07 ART