From: Frank (ocsic@web.de)
Date: Fri Oct 27 2006 - 07:17:16 ART
Ivan schrieb:
Hi,
no, this messages appears only with no static RP configured. If i
configure a static RP
it disappears.
But thats not auto-rp with sparse-dense. From the CISCO docs,
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/himc_c/chap05/mcbbasic.htm#wp1112026
you don't have to configure "ip pim rp-address" on the Auto-RP. With
sparse-mode you configure a
"ip pim autorp listener".
This is needed. That's what i found in the documentation.
Useing c2600-i-mz.123-3.bin, c2600-ik9o3s3-mz.123-10a.bin and
c3640-ik9o3s-mz.124-7.bin only.
Frank
> another point of view can be order of choosing RP. AutoRP is prefer on manualy
> configured RP. May be this message appear after receiving AutoRP-packets
> although router see that RP configured statically.
>
> On Friday 27 October 2006 12:17, Radoslav Vasilev wrote:
>
>> It varies from IOS to IOS - with some IOSes the RP is inteligent to
>> know that "if a DR registers with me, I'm going to behave like a RP".
>> With others you need to manually specify it on the RP so it knows.
>>
>>
>> Rado
>>
>> On 10/27/06, Frank <ocsic@web.de> wrote:
>>
>>> I found out, when i configure:
>>>
>>> ip pim rp-address 150.1.3.3
>>>
>>> on the RP this message will go away. Is this neccessary for SD mode with
>>> Auto-RP?
>>> I have never read about this. Although it does not seem to change
>>> anything.
>>>
>>> Thanks,
>>>
>>> Frank
>>>
>>>
>>>> Hi,
>>>>
>>>> im getting these messages. But i don't have any "ip pim accept-rp" or
>>>> ip pim accept-register" configured. These messages sould appear if the
>>>> RP does
>>>> not want to accept. R3 is the RP and R5 is the mapping agent.
>>>>
>>>> *Mar 12 04:49:24.203: %PIM-1-INVALID_RP_REG: Received Register from
>>>> router 176.1.35.5 for group 239.3.1.1, 150.1.3.3 not willing to be RP
>>>> *Mar 12 04:46:11.451: %PIM-6-INVALID_RP_JOIN: Received (*, 239.3.1.1)
>>>> Join from 176.1.35.5 for invalid RP 150.1.3.3
>>>>
>>>>
>>>> Rack1R3#sh ip pim rp map
>>>> PIM Group-to-RP Mappings
>>>> This system is an RP (Auto-RP)
>>>>
>>>> Rack1R3#s | inc ann
>>>> ip pim send-rp-announce Loopback0 scope 15 group-list 33 interval 5
>>>>
>>>> Rack1R3#sh access-lists 33
>>>> Standard IP access list 33
>>>> 10 permit 239.3.0.0, wildcard bits 0.0.255.255
>>>>
>>>> Rack1R5#s | inc disc
>>>> ip pim send-rp-discovery Loopback0 scope 16
>>>>
>>>> Can someone help out?
>>>>
>>>>
>>>> Frank
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART