From: Amanjot Singh (Amanjot.Singh@selection.co.uk)
Date: Thu Oct 26 2006 - 05:07:31 ART
Yes you would need it on both sides to get the full benefit of the QOS
mechanisms else if you do it on one side then you would be controlling
the flow only from one direction and depending on the utilisation on the
links the priority packets may get dropped. I would say if you control
both routers do it on both sides that is the best configuration.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
haducbinh
Sent: 26 October 2006 08:32
To: ccielab@groupstudy.com
Subject: Need QoS Configuration both side?
Hi GS!
This is my topology: (LAN1)------R1(S0/0) ----(FRAME-RELAY)--------
(S0/0)R2---(LAN2)
User in LAN1 and LAN2 using VoiceIP to communicate, so to ensure that,
Voice
IP traffic get priority over other traffics
I config LLQ for connection between R1 and R2!
My question is:
Do I need to config LLQ for both side: S0/0 of R1 and S0/0 of R2
or just need to config on one side?
Thanks!
HaDucBinh
Mail: <mailto:haducbinh@vnpro.org> haducbinh@vnpro.org or
<mailto:haducbinh@yahoo.com> haducbinh@yahoo.com
Phone: +84 908 191 322
------------------------------------------------------------------------
--- Vietnamese Professionals (VnPro) Cisco Authorised Training 149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh City Tel: (08) 5124257 - (08) 5125314 Fax: (08) 5124314 Website: <http://vnpro.vn> http://vnpro.vn Support Forum: <http://vnpro.org> http://vnpro.org
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART